Commercial roof due diligence and PCA roof reports

Who pays for the roof work in a transaction, and who owns the result

The buyer pays for almost all of it, which is the simple part. The useful questions are who the report is addressed to, who else is allowed to rely on it, what happens to the money if the deal dies, and which of these costs can be pushed to the seller as a condition rather than a favour.

Hands holding a clipboard with an insurance form

The buyer pays. In almost every commercial transaction the party who needs to understand the roof is the party acquiring it, and the convention follows the need. Where a lender is involved the borrower usually funds the lender’s consultant as well, which means the buyer pays twice over for work that may cover similar ground.

The more useful questions sit around that simple answer. Who is the report addressed to, and therefore who can rely on it? What can reasonably be asked of the seller instead of money? And in what order should the money be spent, given that none of it comes back if the deal fails?

Who normally funds what

Item Who pays Notes
Document request and review Buyer Cheapest step and often the most revealing
Buyer’s roof walkover Buyer Commissioned to the buyer’s own scope
Lender’s condition assessment Borrower, usually the buyer Lender is often the named client
Moisture survey Buyer Triggered by what the walkover found
Core cuts and test openings Buyer, including the repair Needs seller consent in advance
Seller’s own prior report Seller, historically Useful background, not a substitute

The pattern is consistent: information the buyer needs is information the buyer funds. What a buyer side roof inspection is scoped to cover is the piece most often underspecified, because it is ordered as a line item rather than written as a scope.

Paying for it does not mean owning it

This is the distinction that costs buyers money. The consultant’s duty of care runs to the named client, not to whoever settled the invoice. A lender’s assessment, paid for by the borrower, is commonly addressed to the lender. The buyer receives a copy for information and has no standing to rely on it, which becomes a problem the moment the buyer wants to take a roof finding to the seller.

Three things to settle at engagement rather than after issue:

  1. Who is named as the client on the report.
  2. Which other parties may be added, and on what terms.
  3. Whether reliance can be extended later, and at what cost.

None of that is unusual to ask. Consultants set it out in the proposal when the question is raised, and how assessment services are scoped and priced is the same conversation seen from the supply side.

What to ask the seller for instead of money

A seller who will not share a cost will often grant something worth more.

  • Time. An inspection period long enough for a moisture survey to be scheduled and reported, rather than one that forces a walkover and a guess.
  • Access. Permission for roof access during business hours, including for test cuts, named in the agreement rather than requested as a courtesy.
  • Documents. The maintenance file, the warranty certificates, the permit history and any prior roof report. The document request that gets there first is free and it reshapes everything that follows.
  • Cooperation with the manufacturer. Where a warranty is live, the seller’s consent to contact the manufacturer about its status and transferability.

Each of those costs the seller nothing in cash and changes what the buyer can establish. A shared inspection fee does neither.

Spend in the order that limits the loss

Diligence money is at risk from the first engagement, so the sequence matters more than the total.

  1. Request documents. Free, fast, and the gaps are findings in themselves.
  2. Walk the roof to an agreed scope, with photographs the buyer keeps.
  3. Scan for moisture only where the walk suggests it is needed.
  4. Cut and test last, with consent, a repair plan and the warranty position known.

Stopping is allowed at every step. Which findings justify repricing rather than walking is the judgement that follows, and where a holdback fits instead of a price cut is the other route when the scope is clear but the timing is not.

Where to go next

Before spending anything, work through the roof side of a diligence checklist so the scope you are paying for matches the decision you have to make. If a lender is involved, raise the naming and reliance question in the same email that asks for the fee proposal, and how the roof sits inside a wider property condition assessment will tell you whether you are buying the same work twice.

Common questions

Does the seller ever pay for the buyer's roof inspection?

Rarely by default, and sometimes by negotiation. The convention is that the party who needs the information pays for it, which means the buyer. A seller may agree to fund or share the cost where a roof concern is holding up a deal they want closed, or where their own disclosure turned out to be wrong.

  • Convention puts the cost on the party who needs it
  • A seller may share it to keep a deal moving
  • A wrong disclosure strengthens the argument
  • Seller funded work raises independence questions
  • Ask for access rather than money as a first move

There is a trade off in asking. A report the seller paid for is a report whose independence a lender or an investment committee may question, and a cost shared inspection can become a cost shared conclusion in the negotiation that follows. The more valuable concession is usually access rather than money: a longer inspection period, permission for test cuts, or delivery of the maintenance and warranty file. Those change what you can find out. A few thousand dollars of inspection cost does not change the deal.

If the lender orders the report, who owns it?

The party named as the client owns it, and that is usually the lender even when the borrower pays the invoice. Ownership decides who can send the report on, who the consultant owes a duty to, and whether the buyer can use the findings in a negotiation with the seller.

  • The named client is not always the payer
  • Ownership decides who may distribute the report
  • The duty of care follows the client, not the fee
  • Buyers may receive a copy without reliance
  • Settle the naming before the engagement starts

This catches buyers out when the lender's consultant finds a roof problem and the buyer wants to reprice. A copy received for information is not the same as a report you are entitled to rely on or to show a seller. The fix is procedural and cheap: agree at engagement who the client is, who will be named, and who may be added later. Consultants are used to the request and will set it out in the proposal if asked.

What is a reliance letter, and does it cost extra?

A reliance letter extends the consultant's duty of care to a party who was not the original client, such as a lender joining later or an investor in the buying entity. It is a standard instrument, it is usually priced as an addition, and the fee is small against the cost of commissioning the work again.

  • It extends duty of care to a named party
  • Each added party is normally named individually
  • Fees and liability caps are usually attached
  • It avoids repeating the field work entirely
  • Request it before the report is finalised

Ask early rather than late. Once a report is issued and the consultant has moved on, adding a party is slower and occasionally resisted, particularly if time has passed and conditions on the roof may have changed. Where a deal is likely to involve a lender who has not yet been chosen, the practical approach is to tell the consultant at engagement that reliance may be extended and get the mechanism and the price agreed then, so it becomes an administrative step rather than a renegotiation.

Who pays for destructive testing like a core cut?

The buyer pays for the test and, under most agreements, for making the roof good afterwards. That repair obligation is the part people miss, and it is worth settling in writing before anybody cuts a membrane, because an unrepaired core cut in a roof you do not end up owning is a genuine liability.

  • The buyer funds the testing it asked for
  • Patching the opening is part of that cost
  • The agreement should name who repairs it
  • Seller consent is normally required in advance
  • Warranty implications need checking first

There is a second consideration on a roof still under a manufacturer warranty, which is that cutting it may require the manufacturer's approved contractor to carry out the repair if the warranty is to survive. That makes the test slightly more expensive and considerably more useful, because a properly closed cut keeps both the information and the warranty. Establish the warranty position before scheduling the work rather than after, since the answer can change who is allowed on the roof.

Is the cost of roof diligence recoverable if the deal dies?

Generally no. Diligence costs are the buyer's own and sit at risk, which is the reason they are sequenced cheapest first. Nothing about a dead deal makes the money return, so the discipline is to spend the small amounts early and hold the large ones until the deal is likely to proceed.

  • Costs are at risk from the first engagement
  • Document review costs least and tells you most
  • A walkover comes before any instrumented survey
  • Destructive testing is the last step, not the first
  • Some findings justify stopping before the big spend

Sequencing is the whole defence. The document request costs nothing and frequently answers the question on its own, because the absence of a maintenance file or a permit history is itself a finding. A walkover is modest and will tell you whether the roof deserves a moisture survey. The survey and any core cuts are the expensive end and belong after the earlier steps have said the deal is real. Spending in that order means a deal that dies early dies cheaply.

Book a diligence inspection

Three things and we will call you back. No obligation.

Or call (646) 643-3790